Group 65Go to Vilfo
All Collections
Getting started
Static IP assignment

Static IP assignment

If Vilfo doesn't get an IP address during initial configuration, it is possible your ISP requires static IP assignment.
Maximilian Holm avatar
Written by Maximilian Holm
Updated over a week ago
  1. Go do admin.vilfo.com
  2. Enter the IPv4 address you've received fron your ISP into the IPv4 address field
  3. Select the Subnet mask you've received from your ISP into the Subnet mask field. If you can not find the subnet mask from the drop-down, select the value 255.255.255.224.
  4. Enter the Gateway address you've received from your ISP into the Gateway field
  5. Enter the DNS address you've received from your ISP into the DNS field.
  6. If applicable, check Configure IPv6 Settings and repeat steps 2-5 for IPv6.
  7. Press Update
Did this answer your question?