By placing a Synology router after Vilfo, your Synology router can be used to extend the wireless network of Vilfo.

Turning your Synology router into an access point

  1. Go to http://synologyrouter:8000
  2. Log in with the username/password provided by your Synology router. If you do not know the login information by hand, there should be a sticker on the bottom of your Synology router with the login information.
  3. Open the Synology Network Center
  4. Click on Operation Modes
  5. Select Wireless AP
  6. Click on Apply
  7. Connect a network cable from the LAN port on Vilfo to the WAN port on your Synology router

Changing operation modes of your router can take 60-90 seconds. Please wait until your router restarts.

To make future changes to your Synology router you will need to do so using the IP address assigned to your Synology router by Vilfo.

Note! If you choose to use your Synology router as an access point, you may want to disable the Wireless network in Vilfo.

Did this answer your question?